iOS Development Tutorial Series: TableViews

Hello again, today we will learn about UITableViews and NSArrays, but before we start I need everyone who reads these tutorials to vote on the poll below, since it will determine how the next tutorials will be presented. Since Apple released the new version of Xcode (Xcode 4) I need to know whether we should use Xcode 4 or Xcode 3 for the tutorials. Xcode 4 does cost $5, but I think it’s well worth the price (in my opinion). You can find Xcode 4 in the Mac App Store.

If you don’t vote you will have no room to complain about which one was chosen. But for today we will just use Xcode 3.

[polldaddy poll=4717765]

Lets get started. A table view is an object that display information by sections and cells in a scrollable window.

Here are some examples of table views:

So what is a table view exactly? Before I explain that, I must explain what an array is.

An array is an object that holds other objects in a certain order. For example an array could be 10 NSStrings in a certain order or no order at all. Essentially, it’s a box to hold objects.

Does that make sense?  It’s an easy concept.

So, lets get back to table views. A tableview is essentially a visual object of an NSArray. In a table view, you can see the objects that were stored in the array and take an action upon that data that is presented. For example, in the iPod app you would tap a table view cell (a cell is a single row of data in the table) and it would start playing whatever you tapped on.

Obviously there is more complexity to both of these objects, but for now, that’s good.

Now that we have laid some ground, lets get started with the tutorial.

1. Create a new view-based project named “TableView”

2. Go to the header file (TableViewController.h).

Since a table view is a visual object that display objects in an array we will need to create an array so that we can populate the table view.

3. In the header file declare this:

NSArray *tableViewArray;

4. We will also need to create a property for the NSArray so that we can set the data that will be in the array. I will explain in further detail what a property is, but for now, that will do. Outside the curly brace, type:

@property (nonatomic, retain) NSArray *tableViewArray;

We’re done in the header. Lets move into interface builder.

5. Open the TableViewViewController.xib file

The only thing we are going to need for this tutorial is a UITableView

6. Drag a UITableView onto your main view.

That’s all we need for our view, but our table view has no way of communicating between our controller (header and implementation files) and our view. So we need to link two things up from our table view to our files owner.

7. Click the table view and then click the connections tab. Now drag the datasource and delegate to the files owner.

Now we need to go back to the header file and do some more work.

8. Behind the UIViewController line type:

<UITableViewDelegate, UITableViewDataSource>

What we are doing here is making our viewcontroller (TableViewViewController) the delegate of UITableViewDelegate and UITableViewDataSource. Don’t worry about what a delegate is, we will cover it in a later tutorial.

You will also need to make a synthesize statement in your implementation file.

9. In your TableViewViewController.m file type:

@synthesize tableViewArray;

10. Scroll down through all the comments until you find the method named -(void)viewDidLoad. Once you find it uncomment it by deleting the “/*” and “*/” before and after the method.

Now what we need to do is create an NSArray and fill it with objects and then set the NSArray to the NSArray we declared in the header file.

10. Below the [super viewDidLoad]; type:

NSArray *array = [[NSArray alloc] initWithObjects:@”Apple”,@”Microsoft”,@”Samsung”,@”Motorola”,nil];

self.tableViewArray = array;

[array release];

What we are doing here is creating an NSArray and setting the objects of it to NSStrings (Apple, Microsoft, Samsung). As you can see at the end of our objects we say nil. What does that even mean? Well, nil essentitally means zero which tells the NSArray that is the end of the list of objects. If you don’t put nil at the end of the array it will crash your app, because when the NSArray gets created is puts those NSStrings in the array but it doesn’t know when to stop loading information. That is fairly simple, right?

Then we are setting the new NSArray we created to the one we declared in the header.

In the last line we release the newly created array because it is no longer needed.

So, now we have our array filled up with some content, but if you were to run your app nothing would show because the table view still doesn’t have a connection to the array itself. We need to make that connection.

11. Copy this method anywhere in your implementation file:

- (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section

What this method does is, it sends a message to the datasource that you plugged in on interface builder asking for the number of rows that will appear in the table view. Since we typically wouldn’t know how many rows in the table view we would need we must set the number to the number of objects in our array.

12. In the new method type:

return [tableViewArray count];

Before we talk about the entire line of code, we need to talk about the return statement. Return sends the value that you request to the method return type. For example, the return type of this method is an NSInteger and what we are doing in the entire line of code is sending the number of entries in the tableViewArray to the method return type, which is an NSInteger.

13. Copy this below your new method.

- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath

This method will get called just like the other one, but this one will get called every time we need a new cell in the table view. For example, since we returned the count of the array in the last method, this new method will get called by the number of items in the table view.

14. In the new method type:

UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:@"SimpleTableIdentifier"];

if (cell == nil) {

cell = [[[UITableViewCell alloc] initWithStyle:UITableViewCellStyleSubtitle reuseIdentifier:@”SimpleTableIdentifier”]autorelease];


cell.textLabel.text = [tableViewArray objectAtIndex:indexPath.row];

return cell;

Here we are creating a new object called UITableViewCell. This is the object that looks like a row in the table view. We won’t worry about the if statement for now, but you just need to know that those top four lines of code are the lines that are safely creating the table view cell.

In the line below the if statement we are setting the text property of the cell to the object that is at the same index in the array as it is in the table view. For example, since the table view is essentially a visual object of the array, it will be in the same order as the array. So when our method gets called it will start at index 0 and it will also call the object at index 0 in the array.

Since our method return type is a UITableViewCell we will return the cell that we created and set the text to the method return type.

Now if you were to run your app everything in your array would show up in your table view.

15. Copy this method below your UITableViewCell method

- (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath

This method gets called when a cell in the table view gets tapped. That’s cool, but how do we know what cell was tapped? Any guesses?

We use the index path.

16. Type this in the new method:

NSString *message = [NSString stringWithFormat:@"You selected %@",[tableViewArray objectAtIndex:indexPath.row]];

UIAlertView *alert = [[UIAlertView alloc] initWithTitle:@”Alert”

message: message delegate:self cancelButtonTitle:@”Close” otherButtonTitles:nil];

[alert show];

[alert release];

Here we are creating an NSString and setting the text to the object in the array that is at the same index that the method has. Then we are creating an alert and setting the message value to the message string and the cancel button as Close. We’ve done this before you know how it works.

We are done with our code! Lets run it and see how it works.

That looks awesome!

The concept of table views itself isn’t very complicated, but what may stump you is: the indexes. If you understand the index concept that I taught above the you’re golden!

That’s it for this tutorial!

You can download the code for this tutorial here.

Please vote in the poll at the top of the page so that I will get unbiased and fair results.

If you enjoy my tutorials, you can support me by buying my app from the App Store (here). Thanks!











19 Responses to “iOS Development Tutorial Series: TableViews”

  1. John Wang 14. Mar, 2011 at 3:20 pm #

    XCode 4 is still available free of charge for registered iOS Developers through the iOS Developer Portal. You aren’t required to download it via the Mac App Store. In the future, that may change, but for now that’s still an option.

    • Anonymous 18. Mar, 2011 at 2:16 pm #

      That is true. I didn’t include that in the tutorial because, so far my audience has been people who are new to Xcode and are not a part of the developer program.

      Good point though :)

      • China 06. Nov, 2011 at 8:27 pm #

        If you wrote an article about life we’d all reach enlhigtennmet.

  2. Praveen Prakash 14. Mar, 2011 at 10:44 pm #

    Thank you Dan so much for this tutorial, looks like very current in terms of iOS version and is simple and easy to understand – just like your podcasts. I’m a great fan of your podcasts. Would like to request for some more real life examples like Table from an XML/JSON received over the network etc. Once again thank you so much and looking forward for more tutorials from you…

  3. Patrick Hazard 16. Mar, 2011 at 11:23 am #

    HI, thanks for these tutorials. I’m finding that when I code and run this in xcode 4 the app is terminating with the exception “Current language: auto; currently objective-c” and highlighting some code in main.m saying received signal: “SIGBRT”

    Do you know what this could be? There are no errors or warnings when i build, just at runtime.


    • Patrick Hazard 17. Mar, 2011 at 12:30 pm #

      Just figured it out, i connected the delegate and the data source for the table view to the view and not the files owner. Silly

      • Derek 28. Mar, 2011 at 10:29 pm #

        Aah, yes, that will definitely give you a runtime crash. Glad you figured it out! :)

  4. Simon 18. Apr, 2011 at 11:23 pm #

    Excellent tutorial!!!!!
    explains everything slowly and makes everything easy to understand!

  5. Daron 15. Sep, 2011 at 9:56 am #

    Hey love the tutorial! One SMALL problem though…
    When I build and run the program it starts with no errors, but the app itself is empty. Its just a tan screen.
    Here is a link to a .zip with the project file!102

    thanks for all the help! :D

  6. angelab 01. Nov, 2011 at 1:01 am #

    Thank you. Seriously. I’ve been through more than one tutorial about how to fill a tableview with content… this has worked for me.

  7. Benjamin 19. Nov, 2011 at 11:44 pm #

    Thanks!!! Excellent Job!!!

  8. Joe Tiger 10. Jan, 2012 at 12:19 am #

    Thanks a lot for this nice code !!!
    I successfully created a tableView and populate it.
    Unfortunately my list is dynamic. And I have to reloadData, refresh the Table View.
    How do you perform a refresh ?

  9. Nishanth Rocker 22. Jun, 2012 at 6:49 am #

    Thank u very much.. u r reason for my growth :-)

  10. Kishor Kundan 01. Sep, 2012 at 1:15 am #

    Very helpful.

    I faced problem with

    NSArray *array = [[NSArray alloc] initWithObjects:@”Apple”,@”Microsoft”,@”Samsung”,@”Motorola”,nil];

    The reason being the “quotes” copied from web.

    My error message was “unexpected ‘@’ in program”

  11. Alex 30. Nov, 2012 at 3:02 am #

    Please keep doing these tutorials for Xcode 3. Plus thanks for all the knowledge you have brought me so far. GREAT TUTORIALS.

  12. GabySmilies 19. Dec, 2012 at 10:59 am #

    Hello. I plan to build a TableView with a Custom cell including a Button. When the user cliks on the Button of a given row this row gets deleted from the TableView and the corresponding Core Data record is managed accordingly…

    Can you tell me how I can know, when the user clicks on the Button of a given, which row did the user click on ?

  13. Adrian 21. Feb, 2013 at 2:34 am #

    good tutorial …
    Thanks ..

  14. R. Kelly 27. May, 2013 at 3:59 pm #

    There has also been a lot of buzz lately about a free framework called Sensible TableView. Looks hot but I still need to try it in a live project to judge myself!


  1. iOS Development Tutorial Series: Local Notifications | Mobile Orchard - 18. Apr, 2011

    [...] also able to specify some text for the notification using the input text field.  The table view (click here for the table view tutorial) displays a list of all of the currently scheduled location notifications within the [...]

Leave a Reply

© 2008-2014 • Mobile Orchard and the Bar-Tree Logo are service marks. ContactAdvertise